History

Except near the electrodes, where there are sheaths containing very few electrons, the ionized gas contains ions and electrons in about equal numbers so that the resultant space charge is very small. We shall use the name plasma to describe this region containing balanced charges of ions and electrons." All the stars are made of plasma, and even the space between the stars is filled with a plasma, albeit a very sparse one (See astrophysical plasma, interstellar medium and intergalactic space). In the solar system, the planet Jupiter accounts for most of the non-plasma, only about 0.1% of the mass and 10⁻¹⁵% of the volume within the orbit of Pluto. Notable plasma physicist Hannes Alfvén also noted that due to their electric charge, very small grains also behave as ions and form part of plasma (see dusty plasmas).

Common forms of plasma include
Artificially produced plasmas Those found in plasma displays, including TVs Inside fluorescent lamps (low energy lighting), neon signs Rocket exhaust The area in front of a spacecraft's heat shield during reentry into the atmosphere Inside a corona discharge ozone generator Fusion energy research The electric arc in an arc lamp, an arc welder or plasma torch Plasma ball (sometimes called a plasma sphere or plasma globe) Plasmas used in semiconductor device fabrication including: Reactive Ion Etching, Sputtering, and Plasma Enhanced Chemical Vapor Deposition	Terrestrial plasmas Lightning Ball lightning St. Elmo's fire Sprites, elves, jets The ionosphere The polar aurorae	and astrophysical plasmas The Sun and other stars (which are plasmas heated by nuclear fusion) The solar wind The interplanetary medium (the space between the planets) The interstellar medium (the space between star systems) The Intergalactic medium (the space between galaxies) The Io-Jupiter flux-tube Accretion discs Interstellar nebulae

Plasma properties and parameters

Definition of a plasma

Although a plasma is loosely described as an electrically neutral medium of positive and negative particles, a definition can have three criteria:

The plasma approximation: Charged particles must be close enough together that each particle influences many nearby charged particles, rather than just interacting with the closest particle (these collective effects are a distinguishing feature of a plasma). The plasma approximation is valid when the number of electrons within the sphere of influence (called the Debye sphere whose radius is the Debye screening length) of a particular particle is large. The average number of particles in the Debye sphere is given by the plasma parameter, "Λ" (the Greek letter Lambda).

Bulk interactions: The Debye screening length (defined above) is short compared to the physical size of the plasma. This criterion means that interactions in the bulk of the plasma are more important than those at its edges, where boundary effects may take place.

Plasma frequency: The electron plasma frequency (measuring plasma oscillations of the electrons) is large compared to the electron-neutral collision frequency (measuring frequency of collisions between electrons and neutral particles). When this condition is valid, plasmas act to shield charges very rapidly (quasineutrality is another defining property of plasmas).

Ranges of plasma parameters

Plasma parameters can take on values varying by many orders of magnitude, but the properties of plasmas with apparently disparate parameters may be very similar (see plasma scaling). The following chart considers only conventional atomic plasmas and not exotic phenomena like quark gluon plasmas:

	Typical ranges of plasma parameters: orders of magnitude (OOM)
Characteristic	Terrestrial plasmas	Cosmic plasmas
Size in metres	10−6 m (lab plasmas) to 102 m (lightning) (~8 OOM)	10−6 m (spacecraft sheath) to 1025 m (intergalactic nebula) (~31 OOM)
Lifetime in seconds	10−12 s (laser-produced plasma) to 107 s (fluorescent lights) (~19 OOM)	101 s (solar flares) to 1017 s (intergalactic plasma) (~17 OOM)
Density in particles per cubic metre	107 m-3 to 1032 m-3 (inertial confinement plasma)	100 (for example, 1) m-3 (intergalactic medium) to 1030 m-3 (stellar core)
Temperature in kelvins	~0 K (crystalline non-neutral plasma) to 108 K (magnetic fusion plasma)	102 K (aurora) to 107 K (solar core)
Magnetic fields in teslas	10−4 T (lab plasma) to 103 T (pulsed-power plasma)	10−12 T (intergalactic medium) to 1011 T (near neutron stars)

Degree of ionization

For plasma to exist, ionization is necessary. The term "plasma density" by itself usually refers to the "electron density", that is, the number of free electrons per unit volume. The degree of ionization of a plasma is the proportion of atoms which have lost (or gained) electrons, and is controlled mostly by the temperature. Even a partially ionized gas in which as little as 1% of the particles are ionized can have the characteristics of a plasma (for example respond to magnetic fields and be highly electrically conductive). The degree of ionization, α is defined as α = n_i/(n_i + n_a) where n_i is the number density of ions and n_a is the number density of neutral atoms. The electron density is related to this by the average charge state <Z> of the ions through n_e=<Z> n_i where n_e is the number density of electrons.

Temperatures

Plasma temperature is commonly measured in kelvins or electronvolts, and is an informal measure of the thermal kinetic energy per particle. In most cases the electrons are close enough to thermal equilibrium that their temperature is relatively well-defined, even when there's a significant deviation from a Maxwellian energy distribution function, for example due to UV radiation, energetic particles, or strong electric fields. Because of the large difference in mass, the electrons come to thermodynamic equilibrium among themselves much faster than they come into equilibrium with the ions or neutral atoms. For this reason the "ion temperature" may be very different from (usually lower than) the "electron temperature". This is especially common in weakly ionized technological plasmas, where the ions are often near the ambient temperature.
   Based on the relative temperatures of the electrons, ions and neutrals, plasmas are classified as "thermal" or "non-thermal". Thermal plasmas have electrons and the heavy particles at the same temperature for example they're in thermal equilibrium with each other. Non-thermal plasmas on the other hand have the ions and neutrals at a much lower temperature (normally room temperature) whereas electrons are much "hotter".
   Temperature controls the degree of plasma ionization. In particular, plasma ionization is determined by the "electron temperature" relative to the ionization energy (and more weakly by the density) in a relationship called the Saha equation. A plasma is sometimes referred to as being "hot" if it's nearly fully ionized, or "cold" if only a small fraction (for example 1%) of the gas molecules are ionized (but other definitions of the terms "hot plasma" and "cold plasma" are common). Even in a "cold" plasma the electron temperature is still typically several thousand degrees Celsius. Plasmas utilized in "plasma technology" ("technological plasmas") are usually cold in this sense.

Potentials

Since plasmas are very good conductors, electric potentials play an important role. The potential as it exists on average in the space between charged particles, independent of the question of how it can be measured, is called the "plasma potential" or the "space potential". If an electrode is inserted into a plasma, its potential will generally lie considerably below the plasma potential due to what is termed a Debye sheath. The good electrical conductivity of plasmas causes their electric fields to be very small. This results in the important concept of "quasineutrality", which says the density of negative charges is approximately equal to the density of positive charges over large volumes of the plasma ($n\_e=langle\; Z\; angle\; n\_i$), but on the scale of the Debye length there can be charge imbalance. In the special case that double layers are formed, the charge separation can extend some tens of Debye lengths.
   The magnitude of the potentials and electric fields must be determined by means other than simply finding the net charge density. A common example is to assume that the electrons satisfy the "Boltzmann relation": » $n\_e\; propto\; e^$ is the "electron collision rate"). It is often the case that the electrons are magnetized while the ions are not. Magnetized plasmas are anisotropic, meaning that their properties in the direction parallel to the magnetic field are different from those perpendicular to it. While electric fields in plasmas are usually small due to the high conductivity, the electric field associated with a plasma moving in a magnetic field is given by E = -v x B (where E is the electric field, v is the velocity, and B is the magnetic field), and isn't affected by Debye shielding.

Comparison of plasma and gas phases

Plasma is often called the fourth state of matter. It is distinct from other lower-energy states of matter; most commonly solid, liquid, and gas, although it's closely related to the gas phase in that it also has no definite form or volume. Physicists consider a plasma to be more than a gas because of a number of distinct properties including the following:

Property	Gas	Plasma
Electrical Conductivity	Very low » Air is an excellent insulator until it breaks down into plasma at electric field strengths above 30 kilovolts per centimeter.	Usually very high » For many purposes the conductivity of a plasma may be treated as infinite.
Independently acting species	One » All gas particles behave in a similar way, influenced by gravity, and collisions with one another	Two or three » Electrons, ions, and neutrals can be distinguished by the sign of their charge so that they behave independently in many circumstances, with different bulk velocities and temperatures, allowing phenomena such as new types of waves and instabilities
Velocity distribution	Maxwellian » Collisions usually lead to a Maxwellian velocity distribution of all gas particles, with very few relatively fast particles.	Often non-Maxwellian » Collisional interactions are often weak in hot plasmas, and external forcing can drive the plasma far from local equilibrium, and lead to a significant population of unusually fast particles.
Interactions	Binary » Two-particle collisions are the rule, three-body collisions extremely rare.	Collective » Waves, or organised motion of plasma, are very important because the particles can interact at long ranges through the electric and magnetic forces.

Complex plasma phenomena

Although the underlying equations governing plasmas are relatively simple, plasma behaviour is extraordinarily varied and subtle: the emergence of unexpected behaviour from a simple model is a typical feature of a complex system. Such systems lie in some sense on the boundary between ordered and disordered behaviour, and can't typically be described either by simple, smooth, mathematical functions, or by pure randomness. The spontaneous formation of interesting spatial features on a wide range of length scales is one manifestation of plasma complexity. The features are interesting, for example, because they're very sharp, spatially intermittent (the distance between features is much larger than the features themselves), or have a fractal form. Many of these features were first studied in the laboratory, and have subsequently been recognised throughout the universe. Examples of complexity and complex structures in plasmas include:

Filamentation

The striations or "stringy" things, seen in many plasmas, like the plasma ball (image above), the aurora, lightning, electric arcs, solar flares, and supernova remnants They are sometimes associated with larger current densities, and are also called magnetic ropes. (See also Plasma pinch)

Shocks or double layers

Narrow sheets with sharp gradients, such as shocks or double layers which support rapid changes in plasma properties. Double layers involve localised charge separation, which causes a large potential difference across the layer, but doesn't generate an electric field outside the layer. Double layers separate adjacent plasma regions with different physical characteristics, and are often found in current carrying plasmas. They accelerate both ions and electrons.

Electric fields and circuits

Quasineutrality of a plasma requires that plasma currents close on themselves in electric circuits. Such circuits follow Kirchhoff's circuit laws, and possess a resistance and inductance. These circuits must generally be treated as a strongly coupled system, with the behaviour in each plasma region dependent on the entire circuit. It is this strong coupling between system elements, together with nonlinearity, which may lead to complex behaviour. Electrical circuits in plasmas store inductive (magnetic) energy, and should the circuit be disrupted, for example, by a plasma instability, the inductive energy will be released as plasma heating and acceleration. This is a common explanation for the heating which takes place in the solar corona. Electric currents, and in particular, magnetic-field-aligned electric currents (which are sometimes generically referred to as "Birkeland currents"), are also observed in the Earth's aurora, and in plasma filaments.

Cellular structure

Narrow sheets with sharp gradients may separate regions with different properties such as magnetization, density, and temperature, resulting in cell-like regions. Examples include the magnetosphere, heliosphere, and heliospheric current sheet. Hannes Alfvén wrote: "From the cosmological point of view, the most important new space research discovery is probably the cellular structure of space. As has been seen, in every region of space which is accessible to in situ measurements, there are a number of 'cell walls', sheets of electric currents, which divide space into compartments with different magnetization, temperature, density, etc ."

Critical ionization velocity

The Critical ionization velocity is the relative velocity between an (magnetized) ionized plasma and a neutral gas above which a runaway ionization process takes place. The critical ionization process is a quite general mechanism for the conversion of the kinetic energy of a rapidly streaming gas into ionization and plasma thermal energy. Critical phenomena in general are typical of complex systems, and may lead to sharp spatial or temporal features.

Ultracold plasma

It is possible to create ultracold plasmas, by using lasers to trap and cool neutral atoms to temperatures of 1 mK or lower. Another laser then ionizes the atoms by giving each of the outermost electrons just enough energy to escape the electrical attraction of its parent ion.
   The key point about ultracold plasmas is that by manipulating the atoms with lasers, the kinetic energy of the liberated electrons can be controlled. Using standard pulsed lasers, the electron energy can be made to correspond to a temperature of as low as 0.1 K,­ a limit set by the frequency bandwidth of the laser pulse. The ions, however, retain the millikelvin temperatures of the neutral atoms. This type of non-equilibrium ultracold plasma evolves rapidly, and many fundamental questions about its behaviour remain unanswered. Experiments conducted so far have revealed surprising dynamics and recombination behavior which are pushing the limits of our knowledge of plasma physics. One of the metastable states of strongly nonideal plasma is Rydberg matter which forms upon condensation of excited atoms.

Non-neutral plasma

The strength and range of the electric force and the good conductivity of plasmas usually ensure that the density of positive and negative charges in any sizeable region are equal ("quasineutrality"). A plasma which has a significant excess of charge density or which is, in the extreme case, composed of only a single species, is called a non-neutral plasma. In such a plasma, electric fields play a dominant role. Examples are charged particle beams, an electron cloud in a Penning trap, and positron plasmas.

Dusty plasma and grain plasma

A dusty plasma is one containing tiny charged particles of dust (typically found in space) which also behaves like a plasma. A plasma containing larger particles is called a grain plasma.

Mathematical descriptions

To completely describe the state of a plasma, we'd need to write down all the particle locations and velocities, and describe the electromagnetic field in the plasma region. However, it's generally not practical or necessary to keep track of all the particles in a plasma. Therefore, plasma physicists commonly use less detailed descriptions known as models, of which there are two main types:

Fluid model

Fluid models describe plasmas in terms of smoothed quantities like density and averaged velocity around each position (see Plasma parameters). One simple fluid model, magnetohydrodynamics, treats the plasma as a single fluid governed by a combination of Maxwell's Equations and the Navier-Stokes Equations. A more general description is the two-fluid picture, where the ions and electrons are described separately. Fluid models are often accurate when collisionality is sufficiently high to keep the plasma velocity distribution close to a Maxwell-Boltzmann distribution. Because fluid models usually describe the plasma in terms of a single flow at a certain temperature at each spatial location, they can neither capture velocity space structures like beams or double layers nor resolve wave-particle effects.

Kinetic model

Kinetic models describe the particle velocity distribution function at each point in the plasma, and therefore don't need to assume a Maxwell-Boltzmann distribution. A kinetic description is often necessary for collisionless plasmas. There are two common approaches to kinetic description of a plasma. One is based on representing the smoothed distribution function on a grid in velocity and position. The other, known as the particle-in-cell (PIC) technique, includes kinetic information by following the trajectories of a large number of individual particles. Kinetic models are generally more computationally intensive than fluid models. The Vlasov equation may be used to describe how a system of particles evolves in an electromagnetic environment.

Common artificial plasma

Most artificial plasmas are generated by the application of electric and/or magnetic fields. Plasma generated in a laboratory setting and for industrial use can be generally categorized by:

The type of power source used to generate the plasma; DC, RF and microwave.

The pressure at which they operate; vacuum pressure (< 10 mTorr), moderate pressure (~ 1 Torr), and atmospheric pressure (760 Torr).

The degree of ionization within the plasma; fully ionized, partially ionized, weakly ionized.

The temperature relationships within the plasma; Thermal plasma (Te = T_ion = T_gas), Non-Thermal or "cold" plasma (Te >> T_ion = T_gas)

The electrode configuration used to generate the plasma.

The magnetization of the particles within the plasma; Magnetized (both ion and electrons are trapped in Larmor orbits by the magnetic field), partially magnetized (the electrons but not the ions are trapped by the magnetic field), non-magnetized (the magnetic field is too weak to trap the particles in orbits but may generate Lorentz forces).

Its application

Examples of industrial/commercial plasma

Low-pressure discharges

Glow discharge plasmas: non-thermal plasmas generated by the application of DC or low frequency RF (<100 kHz) electric field to the gap between two metal electrodes. Probably the most common plasma; this is the type of plasma generated within fluorescent light tubes.

Capacitively coupled plasma (CCP): similar to glow discharge plasmas, but generated with high frequency RF electric fields, typically 13.56 MHz. These differ from glow discharges in that the sheaths are much less intense. These are widely used in the microfabrication and integrated circuit manufacturing industries for plasma etching and plasma enhanced chemical vapor deposition.

Inductively coupled plasma (ICP): similar to a CCP and with similar applications but the electrode consists of a coil wrapped around the discharge volume which inductively excites the plasma.

Wave heated plasma: similar to CCP and ICP in that it's typically RF (or microwave), but is heated by both electrostatic and electromagnetic means. Examples are helicon discharge, electron cyclotron resonance (ECR), and ion cyclotron resonance (ICR). These typically require a coaxial magnetic field for wave propagation.

Atmospheric pressure

Arc discharge: this is a high power thermal discharge of very high temperature ~10,000 K. It can be generated using various power supplies. It is commonly used in metallurgical processes. For example it's used to melt rocks containing Al₂O₃ to produce aluminium.

Corona discharge: this is a non-thermal discharge generated by the application of high voltage to sharp electrode tips. It is commonly used in ozone generators and particle precipitators.

Dielectric barrier discharge (DBD): this is a non-thermal discharge generated by the application of high voltages across small gaps wherein a non-conducting coating prevents the transition of the plasma discharge into an arc. It is often mislabeled 'Corona' discharge in industry and has similar application to corona discharges. It is also widely used in the web treatment of fabrics. The application of the discharge to synthetic fabrics and plastics functionalizes the surface and allows for paints, glues and similar materials to adhere.

Fields of active research

This is just a partial list of topics. A more complete and organized list can be found on the Web site for Plasma science and technology.

Plasma theory Plasma equilibria and stability Plasma interactions with waves and beams Guiding center Adiabatic invariant Debye sheath Coulomb collision Plasmas in nature The Earth's ionosphere Space plasmas, for example Earth's plasmasphere (an inner portion of the magnetosphere dense with plasma) Astrophysical plasma Industrial plasmas Plasma chemistry Plasma processing Plasma Spray Plasma display

Plasma sources Dusty Plasmas Plasma diagnostics Thomson scattering Langmuir probe Spectroscopy Interferometry Ionospheric heating Incoherent scatter radar Plasma applications Fusion power Magnetic fusion energy (MFE) — tokamak, stellarator, reversed field pinch, magnetic mirror, dense plasma focus Inertial fusion energy (IFE) (also Inertial confinement fusion — ICF) Plasma-based weaponry Ion implantation Plasma ashing Food processing (Nonthermal plasma) Plasma arc waste disposal, convert waste into reusable material with plasma. Plasma acceleration

Footnotes

Further Information

Get more info on 'Ionized Gas'.

External Link Exchanges Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page: <a href="http://plasma__physics.totallyexplained.com">Plasma (physics) Totally Explained</a> Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.    As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.